Meat and poultry export drayage with a refrigerated ocean container, USDA FSIS export certification, genset-equipped chassis, temperature-controlled transport and terminal gate-in coordination.

Meat and Poultry Export Drayage: FSIS Rules and Reefers

Published on November 13, 2026 | By BookYourCargo Editorial
Meat and poultry export drayage is the reefer move from a USDA-inspected plant or cold store to the export terminal, and it has to line up with an FSIS export certificate, the importing country's requirements and the vessel's cargo cutoff. The product can be ready and the booking confirmed, and the container still fails if the certificate, the loading point and the container record do not match.

Meat and poultry export drayage is the reefer move from a USDA-inspected plant or cold store to the export terminal, and it has to line up with an FSIS export certificate, the importing country's requirements and the vessel's cargo cutoff. The product can be ready and the booking confirmed, and the container still fails if the certificate, the loading point and the container record do not match.

Most of what decides an export sits on paper: which plant is eligible for which country, where the product was certified, which numbers the certificate carries, and whether the importing country wants anything beyond the US wholesomeness certificate. The drayage leg is where those details meet a specific container on a specific day.

Book Your Cargo handles frozen and chilled meat and poultry export drayage with genset coverage and temperature monitoring on the road leg, the operating temperature taken in writing on every reefer dispatch, and real-time container tracking from pickup to terminal gate-in.

This guide is for general information. Country requirements change often, so confirm the current position for your product and destination in the FSIS Export Library and with your export team.

This guide covers which plants and products are eligible to export, the FSIS export certificate, container and seal numbers, loading at a plant compared with a cold store, market-specific verification programs, temperature on the road leg, the export clock, what happens when a shipment comes back, where US meat exports go, and how Book Your Cargo moves meat and poultry exports.

1. Which plants and products are eligible to export

The starting point is the federally inspected establishment. FSIS's export certification directive states that all federally inspected and passed meat and poultry products are eligible for export, subject to the requirements each importing country sets for establishments and products.

Those requirements are published in the FSIS Export Library, which lists export requirements by country, product and date, including eligible products and the documents each country asks for. FSIS inspectors consult the Export Library before certifying each export certificate.

Some countries accept product only from plants on an approved list. FSIS publishes eligible establishment lists by country, and plants exporting to listed countries must at minimum submit an FSIS 9080-3 form in the Public Health Information System, known as PHIS. The plant details on the country list have to match the export certificate exactly.

How BYC handles this

Book Your Cargo confirms the loading point on every export booking before the empty reefer is dispatched, whether it is the producing plant or a cold store, so the container is loaded at the building the export paperwork is built around rather than a convenient alternative.

2. The FSIS export certificate

Under 9 CFR 322.2, exporters must apply for export certification of inspected and passed products shipped to any foreign country, on paper or electronically, with one certificate per consignment. Poultry export certificates follow the parallel rules in 9 CFR 381 Subpart M.

FSIS form

What it is

FSIS Form 9060-6

Application for Export, filed by the exporter

FSIS Form 9060-5

Meat and Poultry Export Certificate of Wholesomeness, issued by FSIS

FSIS Form 9060-5A and 9060-5B

Continuation sheets for the certificate

FSIS Form 9060-5S

Export certificate for Siluriformes fish, such as catfish

Certification has moved into PHIS. FSIS assigns each application a seven-digit certificate number that also serves as the USDA export stamp number. Under FSIS Notice 05-25, for countries in the PHIS export module, FSIS no longer issues wet-signed 9060-5 certificates or letterhead certificates on security paper. Certificates are digitally signed in PHIS and printed by the exporter on plain paper with a PHIS watermark, and only the last replacement certificate is valid.

More countries joined the PHIS export module in 2026, including Singapore in January and Argentina and Chile in June, and FSIS has been modernizing the PHIS export process during the year. Check current FSIS guidance before relying on an older procedure.

3. Container and seal numbers on the certificate

FSIS does not require shipping marks, company seals or vessel numbers on every certificate. The FSIS Form 9060-5 completion instructions state that they are not required unless the FSIS Export Library indicates so for the destination. Where a country does require them, they appear on the certificate, and FSIS's example certificate for beef to China shows the container and seal numbers in the remarks.

FSIS's voluntary transportation security guidelines also recommend applying seals to all tankers, trucks or containers being shipped and keeping a logbook of seal assignments. Pallet and conveyance stamping is only permitted when the Export Library specifically allows it.

The container record rule for meat exports
Where the destination requires container and seal numbers on the certificate, the numbers on the box at the terminal must match the numbers on the paper. Record both at loading, check them against the certificate before the pickup, and do not change the seal after certification.

How BYC handles this

Book Your Cargo records the container and seal numbers at pickup and keeps them with the move record, so the exporter can check them against the certificate before the container reaches the terminal. If a number does not match, the problem is raised while the container is still on the road leg rather than after it is gated in.

4. Loading at the plant or at a cold store

Where the product is certified changes the plan. FSIS's export directive states that re-inspection is required when an applicant applies for an export certificate after a consignment has moved from the producing establishment to a non-producing establishment, such as a cold storage facility. At the producing plant itself, re-inspection is not required unless inspectors question the product's identity or soundness.

Inspectors may allow an establishment to develop a written program that avoids FSIS re-inspection of each container, and FSIS charges for certification at a non-official site. Either way, an export loaded at a cold store has an extra inspection step that an export loaded at the plant does not.

Loading point

Certification

Planning point

Producing plant

No re-inspection unless identity or soundness is questioned

Empty reefer to the plant, loaded pickup to the terminal

Cold store

Re-inspection required, unless a written program applies

Allow time for re-inspection before the loaded pickup

How BYC handles this

Book Your Cargo plans the empty reefer and the loaded pickup around where certification happens. When product is staged in cold storage near the port, the loaded pickup is booked after the re-inspection window and inside the cargo cutoff, so the container is not collected before it can be certified. The empty reefer is checked before loading, the same discipline behind food-grade container inspection.

5. Market-specific verification programs

Some destinations ask for more than the FSIS certificate. The USDA Agricultural Marketing Service runs export verification programs for specific markets and products, including beef programs for China and Japan, pork for the European Union, and poultry programs. AMS publishes an official listing of eligible suppliers to its bovine programs, and that listing includes warehouse and freezer suppliers as well as plants.

Animal health is a separate certification. The USDA Animal and Plant Health Inspection Service attests to the animal health status of the US state or region where a product originates, while certification of products for human consumption is typically handled by FSIS. Some destinations require both.

For the drayage leg, that means the cold store used for a program shipment matters as much as the plant, because a container loaded at a building that is not on the relevant listing can fail the program requirements even when the product itself is eligible.

Exporting frozen or chilled meat and poultry?
Send us your plant or cold store, destination and booking details, and we will come back with a drayage quote and a pickup plan built around certification and the cargo cutoff, with real-time container tracking to the terminal.

6. Temperature on the road leg

FSIS does not set a single transport temperature for meat and poultry. The FSIS meat and poultry hazards and controls guide tells establishments to monitor temperature during transportation and make sure the refrigeration unit is working, without setting a number. Importing countries and buyers may specify their own temperature requirements.

Poultry has one regulated figure. Under 9 CFR 381.66, poultry labeled fresh frozen or quick frozen must reach 0 degrees Fahrenheit or below at the center within 72 hours of entering the freezer, and frozen poultry must be kept solidly frozen in storage.

The FDA sanitary transportation rule exempts transportation operations of food while it is located in facilities regulated exclusively by USDA throughout the entire facility. In its final rule, FDA explained that FSIS does not have requirements that directly address transportation operations for meat and poultry once they leave inspected facilities, and described the rule as complementing FSIS's efforts. The rule also requires the shipper to specify the operating temperature in writing to the carrier where food needs temperature control.

The temperature rule for meat exports
Give the carrier the operating temperature in writing for every reefer export, match it to the booking and the buyer's requirement, and keep the record. It is the simplest evidence that the product was held correctly between the plant and the terminal.

How BYC handles this

Book Your Cargo takes the operating temperature in writing on every reefer dispatch and keeps it on file, provides genset coverage on the road leg, and monitors temperature and power status in tracking until the container is gated in at the terminal. The same discipline runs through every reefer drayage move.

7. The export clock: VGM, return dates and cutoffs

A loaded meat container has to arrive inside the terminal's receiving window. Under the SOLAS container weight rule, the gross mass of a packed container must be verified by the shipper before it is loaded on a ship, either by weighing the packed container or by weighing all the contents and adding the container's tare weight. The IMO guidance on verified gross mass states that a container without a verified gross mass shall not be loaded.

The earliest return date, the cargo cutoff and the VGM cutoff are set by the carrier and terminal for each booking, and they differ by port and vessel. For reefer exports they also decide how long the loaded container depends on a genset or a terminal plug before it sails.

How BYC handles this

Book Your Cargo books the loaded pickup inside the earliest return date and cargo cutoff for each booking, with the terminal appointment set against that window. Changes to vessel schedules and cutoffs are flagged through tracking before the truck is dispatched, so a container is not loaded for a cutoff that has already moved.

8. When an export shipment comes back

Sometimes a container is rejected at destination and returned. Under 9 CFR 327.17, US-inspected and marked products exported and returned from foreign countries may be admitted back into the United States upon notification to and approval of FSIS International Programs, in specific cases.

FSIS's returned product directive sets out the process. The exporter applies on FSIS Form 9010-1, and FSIS approves, denies or requires reinspection, with reinspection at an official establishment. FSIS must deny where control of the product was lost while it was outside the United States, and the product must also meet APHIS requirements.

How BYC handles this

A returned meat or poultry container is an import move with a fixed destination. Book Your Cargo confirms the official establishment named for reinspection before dispatch and delivers the reefer there under genset coverage and temperature monitoring on the road leg, so the container is not delivered to the exporter's usual warehouse and moved twice.

9. Where US meat exports go

The US Meat Export Federation reported 2025 pork exports of 2.94 million metric tons, with Mexico, China, Japan and South Korea the largest markets by volume. Beef exports totaled 1.14 million metric tons, down 12 percent, with Japan, South Korea and Mexico the largest markets by volume.

Product

2025 export volume

Largest markets by volume

Pork

2.94 million metric tons

Mexico, China, Japan, South Korea

Beef

1.14 million metric tons

Japan, South Korea, Mexico

Source: US Meat Export Federation 2025 export results. On the port side, a USDA AMS study of refrigerated container exports covering 2010 to 2020 found that the Port of Oakland had the largest share of reefer exports, and that among the ports modeled, Los Angeles had the largest share of meat and protein exports.

Asian markets are served mainly through West Coast gateways, which is why Oakland reefer export drayage and Los Angeles and Long Beach export drayage carry so much of the trade. Meat and poultry sit alongside grain, cotton and other farm products in agricultural export container drayage.

10. Real-time container tracking on meat exports

Book Your Cargo provides real-time container tracking on every export move, from pickup to terminal gate-in. The team flags booking, cutoff and appointment changes before a truck is dispatched, not after it reaches the gate. That is how dry runs, missed cutoffs and rolled containers are prevented.

On reefer exports, real-time container tracking extends to temperature and power status on the road leg, so a problem is caught while the product can still be protected, and the exporter has a complete temperature record to the terminal. The drayage technology platform carries bookings, appointments and reefer data through to gate-in.

Where BYC covers today

Inland ramps

Port gateways

Chicago

New York and New Jersey

Columbus

Norfolk

Cincinnati

West Coast gateways

Port drayage, rail drayage and national drayage coverage extends beyond these to the major US ports and rail ramps.

11. A meat and poultry export drayage checklist

  • Plant confirmed as eligible for the destination in the FSIS Export Library, and on the country list where one applies.
  • FSIS Form 9060-6 filed and the 9060-5 certificate issued for the consignment, with only the latest replacement used.
  • Container and seal numbers recorded at loading and matched to the certificate where the destination requires them.
  • For cold store loading, time allowed for FSIS re-inspection before the loaded pickup.
  • For export verification programs, plant and cold store both on the AMS eligible supplier listing.
  • Operating temperature given to the carrier in writing and matched to the booking and buyer requirement.
  • Verified gross mass submitted, and the loaded pickup booked inside the earliest return date and cargo cutoff.
  • Genset coverage and temperature monitoring arranged from loading to terminal gate-in.

Frequently asked questions

1. What is needed to export meat or poultry from the US?

The product must be federally inspected and passed, and it must meet the importing country's requirements published in the FSIS Export Library. The exporter applies for certification on FSIS Form 9060-6, and FSIS issues FSIS Form 9060-5, the Meat and Poultry Export Certificate of Wholesomeness, with one certificate per consignment.

Some countries also require the plant to be on an eligible establishment list, and some destinations ask for additional programs such as USDA AMS export verification or APHIS animal health certification.

2. What is the FSIS Export Library?

The FSIS Export Library sets out export requirements for meat and poultry by country, product and date, including eligible products and the documents each country asks for. FSIS inspectors consult it before certifying each export certificate.

It also says when a destination requires extra details on the certificate, such as container and seal numbers.

3. Does an FSIS export certificate need container and seal numbers?

Only where the destination requires them. The FSIS Form 9060-5 completion instructions state that shipping marks, company seals and vessel numbers are not required unless the FSIS Export Library indicates so.

Where they are required, the numbers on the container at the terminal must match the certificate, so they should be recorded at loading and checked before the pickup.

4. Can meat be certified for export at a cold storage warehouse?

Yes, but FSIS re-inspection is required when the consignment has moved from the producing establishment to a non-producing establishment such as a cold storage facility. Inspectors may allow a written program that avoids re-inspection of each container.

At the producing plant, re-inspection is not required unless inspectors question the product's identity or soundness.

5. What temperature should frozen meat be shipped at?

FSIS does not set a single transport temperature for meat and poultry. Its guidance tells establishments to monitor temperature during transportation, and importing countries and buyers may set their own requirements.

Poultry labeled fresh frozen or quick frozen must reach 0 degrees Fahrenheit or below at the center within 72 hours of entering the freezer. Under the FDA sanitary transportation rule, the shipper specifies the operating temperature to the carrier in writing.

6. What is an AMS export verification program?

It is a USDA Agricultural Marketing Service program that verifies product meets specific requirements of an importing country. AMS runs programs including beef for China and Japan, pork for the European Union, and poultry programs.

AMS publishes an official listing of eligible suppliers to its bovine programs, and the listing includes warehouses and freezers as well as plants.

7. What happens if a meat export is rejected and returned?

US-inspected products exported and returned may be admitted back into the United States upon notification to and approval of FSIS International Programs. The exporter applies on FSIS Form 9010-1, and FSIS approves, denies or requires reinspection at an official establishment.

FSIS must deny where control of the product was lost while it was outside the United States, and the product must also meet APHIS requirements.

8. How does BYC handle meat and poultry export drayage?

Book Your Cargo confirms the loading point before the empty reefer is dispatched, records the container and seal numbers at pickup, and books the loaded pickup inside the earliest return date and cargo cutoff, allowing for re-inspection when product is loaded at a cold store.

The operating temperature is taken in writing on every reefer dispatch, genset coverage and temperature monitoring run on the road leg, and real-time container tracking runs from pickup to terminal gate-in.

Moving meat and poultry to the export terminal

A meat or poultry export rarely fails on the road. It fails when the loading point, the certificate, the container record and the cutoff do not line up. Book Your Cargo handles meat and poultry export drayage with the loading point confirmed, container and seal numbers recorded, genset coverage and temperature monitoring on the road leg, and real-time container tracking from pickup to terminal gate-in.

Exporting frozen or chilled meat and poultry? Send us your plant or cold store, destination and booking details, and we will come back with a drayage quote and a pickup plan built around certification and the cargo cutoff.

Request a Drayage Quote Talk to BYC Operations